Menu

How can you Plan Asbestos Removal?

asbestos removal barrie ontario

Asbestos removal is definitely a sensitive undertaking, which requires high precautionary standards. The preparation phase is particularly essential in avoiding adverse health effects on workers and house occupants.

Listed here is a simple guideline which a qualified specialist would follow when preparing for eliminating friable products (asbestos containing material in powder form), based on information in the Australian Department of Education, Employment and Workplace Relations:

1. Preparation For Removal Project

Before you try to do anything, you should follow these preparatory procedures:

- You should first ask for asbestos removal control plan (ARCP), along with the work instructions.

- To ensure the highest standards of safety and compliance from the project, an on-site assessment must be accomplished. Relevant data can even be sourced from a current asbestos register.

- It's necessary that calculations are made from the specified volume of materials, based on the quality requirements, specifications and plans.

- Applicable environmental requirements ought to be identified so the project can comply with all regulatory obligations.

- The health of workers active in the project have to be preserved. Therefore, you ought to apply all processes required in meeting health surveillance requirements. This involves air monitoring.

- Authorization are able to be obtained (based on company and legislative requirements) after finishing the preparation phase.

- All workers mixed up in project ought to be furnished with personal protective gear (PPE) which is similar to the job. Such equipment ought to be checked for faults beforehand.

2. Preparation Of Removal Area And Site

Once the project has been authorized, following initial preparation phase, an extra preparation of the particular web site is necessary. This requires the subsequent activities:

� The actual materials containing asbestos needs to be identified and also the asbestos register checked.

� Having identified the target materials, you can then implement signage and barricade procedures. That is necessary in delineating work areas inside site; hence preventing unwarranted access by unqualified persons.

� Obviously, it's also advisable to build the decontamination unit before starting the project.

� Additionally you need to test the decontamination procedures, just to ensure their effectiveness, while ruling out likelihood of error.

� Similarly, all equipment and materials which will be employed in eliminating asbestos containing material (ACM) needs to be checked prior to operation.

� It's crucial that adjacent utilities are assessed beforehand. Such utilities as utility lines and water pipes may require deactivation, containment or diversion. Doing this will avert avoidable risks.

� The code of practice and applicable legislation would also need you to notify all occupants within the building, neighbors and then for any one else who could be impacted by the operation.

3. Enclosing The Removal Site

This is actually the last step linked to preparation for the removal project. Various activities involved include:

- You should know the most appropriate enclosure type and removal process, for a way extensive the removal project is.

- Since friable products are potentially more harmful than non-friable products (ACM in solid form), stricter enclosure procedures can be required.

- Each particular enclosure type is selected, you need to make sure that negative air pressure is maintained inside, in compliance with legislative requirements. It should also be inspected and smoke tested to be sure that it's totally air-tight.

- After completing every one of these preparatory procedure, a licensed assessor needs to be notified in the proposed asbestos removal project.

asbestos removal barrie ontario

Content

You can change this Page Layout in the toolbar above if you want to have a different content layout on this page.

You can add more content to this page by clicking the 'Add Content to Page' button.